Re: Installing and running LUA on my Edison - Beginner questions
The default install path for lua is in /usr/local/... A lua install doesn't take much space to install, but If you don't have enough free space simply edit the path in the makefile and run 'make...
View ArticleRe: Latest firmware download source
Ok, what I had to do to successfuly flash the board was to remove all hidden files after copying the files onto Edison partition via Finder and before doing reboot ota. Apparently the leftovers made my...
View ArticleRe: What are the allowed UART speeds on Edison (using breakout and Arduino IDE)
Hi KurtE, Yes, this was it. Thanks for pointing this out. I had seen this before but your reaction triggered me to look again and there seems to be a mistake in the code. There are case switches with a...
View ArticleClik here to view.
Re: DN2820FYK's can't disable usb optimization
Emanuel, The power button must be held down for a 4 full seconds before it causes the system to be forcibly powered off. You want to hold the button down for 3 seconds; this will result in the full...
View ArticleRe: Mouse cursor problem when using widi as a third or forth display
Thank you for sharing all this information.Based on the reports your computer is a hybrid system meaning that it is running with Intel® HD Graphics and AMD Radeon HD 6700M Series card. As first step, I...
View ArticleEdison V_VBAT_BKUP
I'm looking for some more information on the V_VBAT_BKUP features of the Edison. 1) I want to power the RTC when the Edison is powered down (via PWRBTN# or equivalent). The Edison may be powered down...
View ArticleRe: "add a wireless display" missing in action
Thank you for the information.Windows* + P does not show the option. It is necessary to go through the aforementioned steps.
View ArticleRe: 29/59 Bug on WMC with Intel 4600 Graphics
Thanks for joining the Graphics community. This matter has been under investigation and the engineering department is working towards a resolution. Allan.
View ArticleRe: How to customize kernel patches priority
I just tried an example. I've uploaded the example layer I used. https://communities.intel.com/servlet/JiveServlet/downloadBody/23628-102-1-27985/meta-mykmods.tgz You must also add the new layer path...
View ArticleRe: Intel (R) HD graphics 4000 update failure
Addition:- I attempted another driver update- Now, instead of just failing, it states "windows has determined that the most up to date drivers are already installed"- it even identifies the device-...
View ArticleRe: First day ok with 13V. Second day short circuit
Hi jwestmoreland, Be assured that Intel actively working on improving the functionality and the quality of its products including Edison. It’s normal for any new product with bleeding edge technology...
View ArticleRe: What is the maximum RAM that the Galileo board can be expanded to?
Hello teachme, The changes depend on the new chip you're going to install, if you can find one that has the same pinout as the Galileo's stock RAM, well then you should only need to replace the chip,...
View ArticleClik here to view.
Re: Galileo (gen 2) not receiving power?
Hi PootPooter, Usually the pinout of a pot is similar to the picture below. The center pin is the pin 2. You should connect it to an input of another device, for example a LED. The pin 1 and pin 3...
View ArticleClik here to view.
Re: Key Issues faced in Edison development
Would this be an addition to the IDE provided by Intel? Eclipse based? or completely different?
View ArticleRe: 7260 AC+BT problem with both Wifi and Bluetooth
Yes. No change. I reinstalled the windows and it's up to date. Wifi speeds are around 35 mbps and Bluetooth works with a bit of lag and it disconnects every 15-20 mins.Using USB mouse for 5 days.
View ArticleRe: I have an unwanted Intel processor. What does intel suggest to do with it?
Hi!By the end of January, Intel will have a samples return program which you could probably use. If you can wait until then, I'd be glad to get you more information. LynnZ
View ArticleRe: NUC D34010WYKH will not boot or post BIOS
Say that again? In order to replace the battery one must replace the full NUC?
View ArticleRe: Edison V_VBAT_BKUP
Hi mweal In the section 5.3 of the document you can see how the PMIC is powered inside the Edison Compute Module, and how the VSYS and VBAT are related. In the table 5, the VBAT pin is the input for...
View ArticleRe: gaileo gen 2 bricked after trying to use external power supply
Hello Sergio and thank you very much for your precious advice. Yes, my goal is to power both the Roomba and the Galileo board from that same 14.4V battery I listed. Unfortunately I won't be able to get...
View ArticleIntel Edison as a Wi-Fi hotspot using external USB to Ethernet adapter and WLAN?
Hi, I am wondering if it is possible to make a Wi-Fi hotspot from Intel Edison with the access to the Internet? I would use AX88772B based USB to Ethernet link to provide "eth0" interface on Edison....
View Article