Re: How best proceed with overheating i7-4790K?
Further update, I received the replacements back and they ran hot in AIDAx64 but just under 100°C throttle temps with the Intel HS/F. So I checked if I had been sent the right stuff and asked how the...
View ArticleRe: Galileo Debian v1.2 image
This is v1.2 and would be that other Debian 8-). The login is root/root. The image called 1.0.0.7 is not the Official image of the Galileo Debian project. Once you are logged into this image, look at...
View ArticleRe: How to upgrade all drives in a storage pool to expand size on MFSYS25?
I can update my Pool Size we are using MFSYS25 with MFS5520VI Compute Module Firmware version is Current Build Version: 6.5.100.20100630.21247 I fallow the below mention Prosess i) First we put a 600...
View ArticleRe: How to start of with a Galileo?
Hi SakethSaiNarayana, I'll recommend you to check the Getting Started Guide first: Galileo Getting Started - Windows. Then you can check this document where is more sketch examples that you can try:...
View ArticleRe: BSP: whereis bitbake and how much free space?
bitbake is located in 'edison-src/device-software/utils/poky-daisy-11.0.0.tar.bz2' (depends on platform) and is 'installed' as part of the setup process. I used quotes around 'installed' because...
View ArticleRe: Building Linux image for Galileo Gen 2 in Ubuntu 14.04
Hi krish_22, I'm not sure about your opencv c code. For me, $source $TOOLCHAIN_ROOT/environment-setup-i586-poky-linux ${CC} -g -I $TOOLCHAIN_ROOT/sysroots/i586-poky-linux/usr/include/libusb-1.0 -L...
View ArticleRe: Intel Centrino Advanced-N 6205 Drivers Not Getting Updated
Hello Amrit, Please note that depending on the wireless adapter you have, the Operating System installed and the driver version installed the driver version will look different than the one you...
View ArticleRe: "No signal" after Win8 Logo with HD4000
If the computer has worked for about a year, this could be a problem with HDMI port on the computer. You could try to update BIOS on the computer, this will interact with the graphics video BIOS. Also,...
View ArticleRe: Mount USB camera
You are correct the stock Edison image does not have the need kernel drivers/utilities. I have created an Images that adds Video/Audio kernel drivers and utils/libs and OpenCV. You can download it from...
View ArticleRe: Recovering form a bad linux image
Hello, At the boot options prompt, write run do_ota, that should flash your Edison. Alexandru
View ArticleCant Update Edison
I can`t update Edison, configure_edison command have few parameters, there are not configure_edison --update It have only this options, root@AlberEdison:~# configure_edison --help Interactive...
View ArticleRe: Free Windows SDK + Galileo from Microsoft
Ok ThanksI noticed windows IoT has a device directory and thought it might be able to install/use more devices (I wonder if they are the same as for windows 8?)It doesn't seem to have any sort of...
View ArticleD34010 no hdmi sound
Hi, I have d34010fyk nut with haswell i3. The NUC is connected to a Onkyo R390 AVR with hdmi 1.4 cables. I'm having no sound over hdmi. Latest graphic drivers and bios. Windows 8.1 x64 Device: HTR390...
View ArticleIntel Iris Graphics Gaming Problem
I don't know if this is the right place to post this, but I'll try anyway. Recently I installed Halo 2 PC on my laptop. However, the game runs very poorly and the only way i can achieve a reasonable...
View ArticleRe: Intel® Wireless-N 7260 - slows
hpmax wrote: I think its unoffical (see post #159) Intel PROSet/Wireless WiFi Software Version 17.12.0.4 WHQLLenovo has it up on their site, too. The release notes: Version 17.12.0(Fix) Fixed an issue...
View ArticleRe: D54250WYKH bootmgr missing
HeyHave you tried to Load default bios settings with F9 in bios ?Be sure that Legacy Boot is enabledAnd secure boot should be disabled as far as i knowHope this could help you
View ArticleSerial connection to galileo has zero response via putty
Hey guys, I have bought a USB to RS232 adaptor and wired an RS232 to 3.5mm jack according to this thread. I am using a mac running parallels with windows 7 64 bit and have successfully installed the...
View ArticleRe: Intel Galileo gen 1 with Visual Studio problem
Hi Sergio,when I running sketch in Galileo IDE code it works, but i using then USB cable. Regardsgazo
View ArticleRe: How to get I2C commo using Edison Arduino breakout board?
I had never tried I2C in the Arduino environment on Edison (only in node.js/linux) so I thought I would give it a try. I tested an I2C 16x2 Character display and everything worked as expected (no...
View Article