Clik here to view.
Re: Memory ranges reported by ACPI
Thanks Allan, The details I could find are - * Desktop Board: Gigabyte Z87-HD3* Board Altered Assembly Number (AA#): ?* Board Serial Number (SN#): ?* Previous BIOS: F6* Current BIOS: F7 01/20/2014*...
View ArticleRe: Centrino Ultimate N6300 AGN drops connections
Does not occur with 15.9.0.5 anymore. Taken out http://downloads.dell.com/FOLDER02027225M/1/E5530-win7-A08-GGJRC.CAB
View ArticleRe: Wifi mPCIe compatibility
Hi no way, I gave up months ago on this and on the board at all. I felt it was too early. Now I'll try with the recent 1.00 (or 1.02 if I'm not wrong) but don't know when.Antenna is not an issue at...
View ArticleRe: Intel nuc resolution problems
just installed it a few hours ago after reinstalling windows 2 or so times the problem always occurs, when i change the resolution the picture still does not fit.
View ArticleRe: Galileo version 2
Hi JMR,The Intel Galileo Gen2 Board has the same Quark SoC X1000 processor as Intel Galileo.Regards, JPMontero_Intel
View ArticleRe: LINUX_IMAGE*_v1.75.7z does not have SSH?
Hi ghanashyamprabhu I've checked the Linux Image 1.0.0 and found the sshd inside the init.d directory. Please make sure you are booting from the SD card. An easy way to test this is to upload the Blink...
View ArticleRe: Intel nuc resolution problems
On your TV, try something like Menu Setup - Other Settings - Picture Overscan OFF (the TV's ON setting hides the edge of image).
View ArticleRe: Intel Haswell Refresh For DZ87KLT-75K? & Intel Broadwell Support?
Thanks Ryan for sharing your results on experimenting with the 4790K. Now if Intel will just do us a solid and make the BIOS update. Other companies with Z87 boards are supporting their loyal...
View ArticleRe: Intel SSD 530 not seen on OS install screen - ASRock C2750D4L
Hi ken-Intel, I can't change the SATA mode to IDE, the SATA mode option has only ACHI.My BIOS version is 403, SSD firmware is DC32. I also reported to ASUS support before I found this thread but no...
View ArticleClik here to view.
Re: Intel nuc resolution problems
dougho, Great catch! I was looking for an overscan setting in the Intel drivers. I didn't think to check the tv. Jason
View ArticleRe: Intel Wireless-N 7260 fails to connect WLAN and Bluetooth with Windows 8.1
OK. Will do. (There is no battery, just AC power.)
View ArticleRe: D54250WYK, Samsung U28D590D, 4K-resolution not working
Sylvia, Not running into any issues with the beta drivers, unfortunately still no 3840x2160 available
View ArticleRe: D54250WYK, Samsung U28D590D, 4K-resolution not working
Thanks Sylvia, will give that a try later and let you know how it goes
View ArticleRe: D34010WYK + USB SoundCard + Netflix Win 8 App + 5.1 Sound = No go
I have a Yamaha AVR, so it's definitely not specific to Denon I can't remember where I read this as I've been reading quite a few threads related to the same issue. Someone had a theory that it was...
View ArticleRe: Intel dashboard hotspot problem
Intel® My WiFi Dashboard has not been a supported feature since early 2013. It was phased out after the 15.x version of Intel® PROSet/Wireless. Hotspot capability is supported natively by the operating...
View ArticleClik here to view.
NUC. It does not support HDMI to VGA adapter
New NUC as DCCP847DYE not work with standard monitors. Not compatible with HDMI to VGA adapters as StarTech
View ArticleRe: D34010WYK does neither boot from USB 3.0 nor boots with plugged USB 3.0...
I also have a D54250WYK that freezes on the Intel NUC boot screen (which normally shows the "press key for boot options" note in the lower right, but doesn't when it freezes) when a USB 3.0 device is...
View ArticleRe: D54250WYK, displayport 1.2 dual monitors and Ubuntu (trusty tahr)
Thanks for all your help, Sylvia. Unfortunately, once I got it to 0021, it just hung on the BIOS screen (still on HDMI only, no output on the DisplayPort). I've returned that unit and just got a new...
View ArticleLatest Intel® PROSet/Wireless Software change / fix logs - Release notes
Hi everyone, I have been a follower of the forum for some time now and have finally joined up to contribute. In a way I feel indebted to the great people sharing a wealth of information around here, in...
View Article