From BIOS menu : Advanced tab -> Mass Storage Ctrl Configuration :
=> AHCI Capable SATA Ctrl Configuration [Enhanced] tried also [Compatibility] & [AHCI]
=> SAS/SATA Capable Ctrl Configuration [Intel RSTe]
Bios display (when drive & dvd connected to SATA port)
SATA Port-0 HL-DT-STDVD-RO ATAPI (DVD-ROM drive)
SATA Port-1 WDC-WD10EADS-2 (1000.2 GB) 3.5" Western Digital 1 TB SATA HDD
or WDC-WD5000BPKT (500.1 GB) 2.5" Western Digital 500 GB SATA HDD
If HDD connected to SAS/SATA (pass-through mode) no devices are detected on those 4 ports (blue)
Tried to connect just 1 HDD on a SAS/SATA port without any devices on the 2 white SATA, same issue.
Normally BIOS should display any detected HHD devices attached to those 4 blue SAS/SATA port ?
Thanks
/ Paco
