Ok I brought an Edison and started tinkering around. Tried to connect USB peripherals to check what I can do with it. But it simply refuses everything except serial to computer. Ive tried webcams, keyboards, usb storage devices. Nothing is picked up by the board. I even tried Ubilinux, Debian, Yocto nothing at all. I am using the breakout kit. When I try
root@Tesla:~# lsusb unable to initialize libusb: -99 root@Tesla:~# dmesg | grep -i usb [ 0.204518] usbcore: registered new interface driver usbfs [ 0.204618] usbcore: registered new interface driver hub [ 0.204823] usbcore: registered new device driver usb [ 0.761564] usbcore: registered new interface driver asix [ 0.761646] usbcore: registered new interface driver cdc_subset [ 0.761778] usbcore: registered new interface driver cdc_ncm [ 0.764218] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.764555] usbcore: registered new interface driver cdc_acm [ 0.764573] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 0.764678] usbcore: registered new interface driver usb-storage [ 0.764867] usbcore: registered new interface driver usbserial [ 0.764941] usbcore: registered new interface driver pl2303 [ 0.765010] usbserial: USB Serial support registered for pl2303 [ 1.605615] usbcore: registered new interface driver usbhid [ 1.605635] usbhid: USB HID core driver [ 4.988011] usb0: MAC 02:00:86:f2:d5:6b [ 4.988033] usb0: HOST MAC 8a:b4:83:9c:e1:fe [ 9.989181] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
Is this minibreakout capable of usb interface with device? Is my board broken or am I doing sth wrong?