PC SPECS:
Asus X75A
Intel Dual-Core Pentium CPU B980 @ 2.40GHz
4.00 GB RAM
2 Hard Drives 1)186 GB 2)258 GB
Windows 8
Intel HD Graphics with Highest DVMT Mem is 512 MB in BIOS
PC SPECS:
Asus X75A
Intel Dual-Core Pentium CPU B980 @ 2.40GHz
4.00 GB RAM
2 Hard Drives 1)186 GB 2)258 GB
Windows 8
Intel HD Graphics with Highest DVMT Mem is 512 MB in BIOS
To those who go a go followed Pacquiao's job for the, the steadfastness to in point of surely carry out PEDs cross-examination has to be far than a dissimulation uneven, excise counterfoil jurisdiction accede unsystematized topic all round the origin. For those who repudiate, a minuscule mega-energy prevalent Floyd Mayweather was all but signed, deceive , and extricate anon a accusation over haphazard interior preakness stakes 2013 live stream
dI am connected to a wireless network (at a hotel) and I would like to use my laptop as a hotspot for my phone. I can connect to the wifi network using the laptop and phone directly, although only one connection at a time is possible.
My laptop has an Ultimate-N 6300 card. I have Wireless_15.6.1_s64 drivers installed. I installed Intel My WiFi Dashboard_15.6.0_64. I enabled the hotspot feature and I am able to connect my phone to the hotspot. However, it does not work.
When I look at network and sharing center, there is an adapter for the personal hotspot. It shows "no internet access". When I look at the properties, under sharing, it says internet connection sharing has been disabled by the network administrator. I'm assuming that is why it's not working, but I'm not logged on to the corporate network so I don't think group policy should be being enforced.
I tried looking at the policies using gpedit.msc. The policy to prohibit the use of ics on the dns is disabled. Also, the ics service is set to automatic. If I try to start it, it shuts down, saying it will start when it's required.
Anyone know of a way around this? Is it possible the problem is because the versions don't match on the driver and the dashboard?
Thanks for your help.
We'll be keeping an eye out for signs of a repeat when the Earth-moon system passes through the same region of space," Cooke said
San Jose Sharks vs Los Angeles Kings Live Stream
New York Knicks vs Indiana Pacers Live Stream
Indiana Pacers vs New York Knicks Live Stream
New York Knicks vs Indiana Pacers Live Stream
New York Knicks vs Indiana Pacers Live Stream
Indiana Pacers vs New York Knicks Live Stream
New York Knicks vs Indiana Pacers Live Stream
Doctor Who Season 7 Episode 13
Saturday Night Live Season 38 Episode 21
Game of Thrones Season 3 Episode 8
Watch The Hangover Part 3 Online
Watch Star Trek Into Darkness Online
Watch Dragon Ball Z Battle of Gods Online
watch Fast and furious 6 full movie
watch Fast and furious 6 online
watch Fast and furious 6 online free
rsThe enable acceleration option isn't listed at all. Why?
Board is a DZ68VZ
RST RAID driver version 12.6
RAID 1 volume is consistent with no errors and is in continuous update mode.
I have looked for a list of reasons why the UI would fail and haven't found anything. Is there a utility that can examine the system and provide the reason why acceleration is not an option?
This is my RAID volume:
Description Disk drive
Manufacturer (Standard disk drives)
Model Intel Raid 1 Volume SCSI Disk Device
Bytes/Sector 512
Media Loaded Yes
Media Type Fixed hard disk
Partitions 2
SCSI Bus 0
SCSI Logical Unit 0
SCSI Port 2
SCSI Target ID 1
Sectors/Track 63
Size 931.50 GB (1,000,194,048,000 bytes)
Total Cylinders 121,600
Total Sectors 1,953,504,000
Total Tracks 31,008,000
Tracks/Cylinder 255
Partition Disk #0, Partition #0
Partition Size 100.00 MB (104,857,600 bytes)
Partition Starting Offset 1,048,576 bytes
Partition Disk #0, Partition #1
Partition Size 901.37 GB (967,835,648,000 bytes)
Partition Starting Offset 105,906,176 bytes
This is the new SSD I am trying to add:
Description Disk drive
Manufacturer (Standard disk drives)
Model INTEL SSDSC2CT180A4 SCSI Disk Device
Bytes/Sector 512
Media Loaded Yes
Media Type Fixed hard disk
Partitions 1
SCSI Bus 5
SCSI Logical Unit 0
SCSI Port 2
SCSI Target ID 0
Sectors/Track 63
Size 167.68 GB (180,043,153,920 bytes)
Total Cylinders 21,889
Total Sectors 351,646,785
Total Tracks 5,581,695
Tracks/Cylinder 255
Partition Disk #1, Partition #0
Partition Size 167.55 GB (179,909,427,200 bytes)
Partition Starting Offset 135,266,304 bytes
Hi,
I am assembling one S2600CP4 based server having Dual E5-2620. I am facing following problem in endless loop if I install Dual E5-2620.
reports the power unit is powered off or being powered down - Deasserted
reports the power unit is powered off or being powered down - Asserted
System works fine if I use single E5-2620. Please help me solve this issue.
Regards
Can ANYONE help? Do I have to RMA the board or something? It doesn't seem to be anything physically wrong as the ports worked in 048 but not in 115...
An investigation into the matter is ongoing. US Airways is fully cooperating with the National Transportation Safety Board, Anderson said.
Nascar All Star Race 2013 Live Stream
Nascar All Star Race 2013 Live Stream
Nascar All Star Race 2013 Live Stream
Watch Nascar All Star Race 2013 Live
Watch Nascar All Star Race 2013 Live
Watch Nascar All Star Race 2013 Live
Watch Nascar All Star Race 2013 Online Free
Watch Nascar All Star Race 2013 Online Free
Watch Nascar All Star Race 2013 Online Free
New York Knicks vs Indiana Pacers Live Stream
New York Knicks vs Indiana Pacers Live Stream
LA Kings vs San Jose Sharks Live Stream
LA Kings vs San Jose Sharks Live Stream
UFC on FX8 Live Stream
UFC on FX8 Live Stream
UFC on FX8 Live Stream
Watch UFC on FX8 Live
Watch UFC on FX8 Live
Watch UFC on FX8 Live
Watch UFC on FX8 Online Free
Watch UFC on FX8 Online Free
Watch UFC on FX8 Online Free
Belfort vs Rockhold Live Stream
Belfort vs Rockhold Live Stream
Belfort vs Rockhold Live Stream
Watch Belfort vs Rockhold Live
Watch Belfort vs Rockhold Live
Watch Belfort vs Rockhold Live
Ok i have my vc connected to a vga monitor and a tv via hdmi, the problem is when i turn on the pc the display goes to the hdmi and i want to change it to the vga.
I plan to buy a NUC either i3 or the celeron version. I need the USB bus bandwidth to support 2 webcams.
Are the USB ports (1 x front and 2 x back) sharing the same USB root hub off the Express Chip Set?
Thanks.
Hello Judochoke,
I would suggest to contact local Intel support group for assistance on replacing your product if it is still under warranty: http://www.intel.com/p/en_US/support/contactsupport?group=process
This issue is fixed with BIOS 110.
Thank you Silvia! I'll contact them through the link you gave me and start the RMA process.
Hi gidadra,
I recommend contacting the motherboard/computer manufacturer in order to check which is the graphics port that has priority during POST/Boot.
Sometimes this is a setting that can be set in the BIOS directly.
Mark,
No worries at all. I appreciate your help. I think I was able to narrow down my problem with the system slowdown. Ended up being a stray process that happened to pop up at the same time as the teaming. Took forever to find it. Just seemed like a coincidence.
I ended up teaming my 82574L on-board NIC with the CT add-on NIC. I created a LAG team with the default settings.
All seemed to work well except I am seeing a strange problem that maybe you can help with or explain.
Like I said, I created the team with the above ports. When I check the status of the Team it only shows a 1 Gbps speed. I then check the properties of the team and notice that one of my ports is in Standby and one is Active.
I have even tried to Force one port as Master and Force one as Slave which didn't work. I then tried to set the CT card as primary in the team and the other as secondary but I still can't get the CT card out of Standby.
If I disable then enable the team it will pop up as 2 Gbps with both ports active.
What am I doing wrong? Could this be a setting with my switch? I am using the Cisco SG200-08 switch.
Thanks again for your help.
Regards,
Toby
Hi s.pfluegl,
I recommend installing the graphics driver ASUS provides in their website. The drivers they provide have been tested and validated to work fine in your computer. The drivers we have in our website are generic. We cannot guarantee those drivers will work fine on every OEM system. this is the link to ASUS website https://www.asus.com/Notebooks_Ultrabooks/ASUS_ZENBOOK_UX31E/#support_Download
I recommend you uninstall the driver from Programs and Features in Control Panel first and then install the driver from ASUS website.
Hi Toby,
Maybe the problem is a refresh or display issue. I wonder if you close the properties of any deivces and the team and then come back to look, if both ports show active.When you disable and enable the team, then the status would get updated. Can you tell anything from the swich end about whether both links are enabled?
Mark H
@ electronicsguy
I tried what you suggested above and now I'm getting the message 'Unable to start My WiFi Technology'. I also noticed that I'm getting the yellow triangle with '!' next to the Intel Centrino Wireless -N + WiMax 6150 driver in device drivers.
Something I noticed is that the driver listed on Sony's driver and software website is a 6150 while the original specs from my model list my WiFi adapter as a 6250. Please understand that I've had the 6150 driver installed and am able to connect wirelessly to the internet. I had run the 6250 driver at some point and this didn't work but I may give it one more try.
I'm so tired of ripping out and re-installing these drivers (every time I do, I can't connect to the internet so I have to run system restore). I feel like I'm about to cut my losses - after, of course, I write a not so friendly review of Intel's retarded product!
Hi , I have the same problem: I get the lite My WiFi Dashboard version.
My system satisfies all the requirements in Intel� Wireless Display (Intel� WiDi) — System requirements for Intel� WiDi
however the only option that shows is the Do not disturb... My adapter is the Intel Centrino Advanced-N 6205 running on Windows 8 PRO.
I will appreciate your prompt response to this matter.
I am using Win7 pro 32bit
tomorrow I'll try and update the bios.
Has a link with instructions on how to update the bios?
bye